16
ow to use washer
H
Option
• By pressing the option
button, only one option
function may be selected.
NOTE:
Depending on the selected
program cycle, not all
Options may be selectable.
Start/Pause
• This Start/Pause button is used to start
wash cycle or pause the wash cycle.
• If temporary stop of wash cycle is needed,
press “Start/Pause” button.
• When in Pause, the power is turned off
automatically after 4 minutes.
1. Start
• Use this option for loads that need
pretreatment. This adds 16 minutes of pre
washing before draining.
- When using Pre Wash option, do not use a
liquid detergent for the main wash.
Use powder for the main wash.
1. Pre Wash
• Use this option to rinse and then spin
2. Rinse + Spin
• When you want spin only, select this option.
3. Spin Only
• If you want to eliminate protein stains(milk,
blood, chocolate...), you may select Bio
function by pressing the option button.
NB. You can select Bio function when
temperature is higher than 60。C in Cotton,
Cotton-Eco, Baby Care.
4. Bio
• Use this mode to wash normal clothes or thick
and heavy clothes which are excessively dirty.
5. Soak
2. Pause
Door Lock
• Lights whenever the door of the washer is
locked.
• The door can be unlocked by pressing the
Start/Pause button to stop the washer.
• The door can be opened after a short delay.
Detecting
• While the "Detecting" is shown in the display
the machine rotates slowly and detects how
many laundries are loaded in the drum. It
will take a few seconds.
To Next Page
Loading...
