15
ow to use washer
H
2. No spin
Spin
• By turning the Spin dial, the
spin speed can be chosen.
[WD-14360(5)TD]
3. Rinse Hold
• Is selected by turning the spin dial
repeatedly this function leaves clothes in
the machine; suspended in the water after
a rinse without entering into spin.
• To proceed through to a drain or spin, once
the rinse hold function is completed using
Spin dial to the required program.
(Spin)
The required lamp will light up for
identification.
• If no spin is selected, the washer stops after
draining water.
[WD-12360(5)TD]
1. Spin selection
• Spin Speed is available according to
the program as follows.
WD-14360(5)TD
- Cotton / Rinse+Spin / Quick 30
No Spin - Rinse Hold - 400 - 600 -
800 - 1000 - 1400
- Synthetic / Wool / Hand Wash
No Spin - Rinse Hold - 400 - 600 -
800 - 1000
- Delicate
No Spin - Rinse Hold - 400 - 600 - 800
WD-12360(5)TD
- Cotton / Rinse+Spin / Quick 30
No Spin - Rinse Hold - 400 - 600 -
800 - 1000 - 1200
- Synthetic / Wool / Hand Wash
No Spin - Rinse Hold - 400 - 600 -
800 - 1000
- Delicate
No Spin - Rinse Hold - 400 - 600 - 800
Spin only:
1. Press the Power buton.
2. Set the desired spin speed by turning the
Spin Dial.
3. Press the Start/Pause button.