LG WD14360TD - Page 19

18
ow to use washer
H
Start/Pause
Door Lock
Detecting
• This Start/Pause button is used to start
wash cycle or pause the wash cycle.
• If temporary stop of wash cycle is needed,
press the Start/Pause button.
• When in Pause, the power is turned off
automatically after 4 minutes.
• NB. The door will not open before 1 to 2
minutes when Pause is selected,
or at the end of the wash cycle.
1. Start
2. Pause
1. Power
2. Initial Program
Power
• Press the Power button to turn power on
and off
• To cancel the Time Delay function, the
power button should be pressed.
• When the Power button is pressed, the
washer is ready for Cotton program. And
the other initial conditions as follows.
• So, if you want to advance into the
washing cycle without changing the
program, just press the Start/Pause
button and then the washer will proceed.
■ Initial program
• WD-14360(5)TD
- Cotton Program / Main wash /
Normal Rinse / 1400 rpm / 60˚C
• WD-12360(5)TD
- Cotton Program / Main wash /
Normal Rinse / 1200 rpm / 60˚C
Aqua Lock
• While the "Detecting" is shown in the display
the machine rotates slowly and detects how
many laundries are loaded in the drum. It will
take a few seconds.
• Available in Cotton and Synthetic.
• Lights whenever the door of the washer is
locked.
• The door can be unlocked by pressing the
Start/Pause button to stop the washer.
• The door can be opened after a short delay.
Aqua Lock