27
2) Option Washing
When you only need the Wash, Wash/Rinse or Rinse cycles, these can be set manually
Press the AUTO OFF (Power) button to turn power on.
Press the PROCESS button until above Option Washing light is on.
When you want to only drain, wait until the water in the washing tub drains
completely and then, turn off the power.
Add the laundry into the washing tub.
Press the START/PAUSE button.
Press the WATER LEVEL button, to control the water level according to the amount of
laundry. If you do not choose anything, it is set the LARGE water level automatically.
Add the detergent and close the lid.
1
2
3
4
5
6
• When a Wash, Wash/Rinse or Rinse only option is selected, after the wash is completed the water will not be drained
off, If you wish to drain the water, press the SPIN button and wait until the water in the tub has drained completely. Then
press the START/PAUSE button .
• If you do not specify the water level, then Medium will be automatically selected.
• If only Rinse is selected, the process will start from Water Supply.
Note
Wash , Wash+Rinse , Rinse , Rinse+Spin , Spin only options
To Next Page
Loading...
Need help?
General
