32 33
●
The Fuzzy program is used for average day to day
washing.
●
Press POWER ON button.
●
Load clothes.
●
Add detergent, bleach and conditioner as desired.
●
Close the lid and press START/PAUSE button.
●
The water level lights will scroll up and down while the
washer is working out the optimum water level for your
clothes load.
●
Other programmes are selected as follows.
●
Press POWER ON button.
●
Load clothes.
●
Add detergent, bleach and conditioner as desired.
●
Select temperature, level, process, program and options as described below.
●
Close the lid and press START/PAUSE button.
5) WF-402
❏
Fully automatic control
❏
Manual control
❏
Preparation before wash
Preparation before wash
Sort your washing into separate wash loads
●
Each load of washing should contain clothing which needs the same
washing conditions. For example, you should not wash delicate
clothes with very dirty work clothes.
●
Some fabrics are lint collectors and can pick up lint, dirt and colour
from other fabrics, which are lint producers. Some examples are list-
ed below.
LINT COLLECTORS LINT PRODUCERS
Corduroy Towels
Synthetics Nappies
Permanent press fabrics Chenille / Candlewick
Make sure that you wash lint collectors separately from lint producers.
●
Check if laundry is washable in
water.
●
Be sure to remove things such
as keys, pins and coins from the
laundry.
●
Wash oily or dyed laundry sep-
arately.
●
Shake loose dirt off before
washing.
●
Wash uffy laundry by turning
it inside out.
●
Wash delicate clothes, wrap-
ping them in a nylon net.
Water level button
(indication of detergent amount)
• Use to adjust the water level as required. The
appropriate amount of detergent is shown next to
the water level in the WATER-DETERGENT
diagram
• Water level is automatically selected for NORMAL
and HEAVY programs.
The following settings are indicated as the button is
pushed LARGE EX-LARGE SMALL
MEDIUM LARGE
Water temperature button
(option)
• Use to select water temperature.
Pressing the button allows you to
select Warm Hot Cold
Warm respectively.
Default setting is Warm.
Process button
• Use to select SOAK, WASH,
RINSE and SPIN functions as
desired.
Child lock function
Use to lock or unlock the
control buttons to prevent
setting from being changed
by a child.
To lock, push the PROCESS,
and PROGRAM buttons
simultaneously and to unlock
push them one more time
during the washing process.
Delay Start
(Reservation)
button
• Use to set a
delayed finishing
time.
The time changes
6
→ 9→15(6+9)→
6hr when the
button is pushed.
Program button
• Use for selecting wash program.
• This button allows you to select 4
different programs for different kinds of
laundry and dirtiness.
• program selections light up in sequence
as follows: NORMAL SPEEDY
HEAVY WOOL NORMAL
(NORMAL) etc. Select the desired
program by pressing the button.
Start/ Pause button
• Use to start or pause the washing process.
• Repeats start and pause by pushing the
button.
• The power goes off automatically 10 minutes
after stopping.
※ This appliance is fitted with a safety
function that automatically stops the
operation of the washing machine when it
is exposed to heavy disturbance on the
mains.
To Next Page
Loading...
