LG WF-T802 - Page 36

43
• To use the CHECK PROGRAM (QC TEST MODE),while pressing the 󰾠WATER LEVEL&PROCESS󰾡buttons,
press the󰾠 POWER󰾡button.Do not deposit any laundry in the wash tub while in this mode.
• In QC TEST MODE all LEDs are on and press START(PAUSE) button to check over the following
items.
NO CHECK METHOD DISPLAY CHECK ITEM
1
2
3
4
5
6
7
8
Initial state
Press once
Press twice
Press 3 times
Press 4 times
Press 5 times
Press 6 times
Press 6 times
• water level frequency is on
DISPLAY in the condition of no
water in TUB.
• After detecting laundry amount
the number of pulse is on the
DISPLAY.
• AUTO OFF.
• All LEDS ON.
※64~70 DISPLAY.
(The meaning of 64~70 number is
264~270kHz really)
• Laundry amount test.
• COLD water ON.
• HOT water ON.
• If the LID is opened, is on the
DISPLAY. In that case, close the LID.
• DRAIN MOTOR (1)ON.
• If the LID is opened, is on the
DISPLAY. In that case, close the LID.
• DRAIN MOTOR (2)ON.
• DRAIN PUMP ON.
• All LEDS OFF.
3) WF-T853, T652, T652A, T452, T452A
WF-T853/T652/T652A WF-T452/T452A