Additional Function Options
ashing Option
W
14
When you only need the Wash, Wash/Rinse or Rinse cycles, these can be set manually.
Press the AUTO OFF (Power) button to turn power on.
Press the PROCESS button until below desired option light is on. ( Refer to p. 11.)
• When you want to only drain, wait until the water in the washing tub
drains completely and then turn off the power.
Add the laundry into the washing tub.
Press the START/PAUSE button.
Press the WATER LEVEL button.
• Control the water level according to the amount of laundry.
• If you do not choose anything, it is set the ‘Large’ water level automatically.
Add the detergent if required and close the lid.
(Refer to p. 10.)
1
2
3
4
5
6
• When spin option is not selected, the water will not be drained off after the process is completed .
When you want the water to drain only, wait until the water in the wash tub finishes draining and
turn off the power.
• If you do not specify the water level, then Large will be selected automatically.
• If Rinse only is selected, the process will start from water spply.
Note
Wash , Wash+Rinse , Rinse , Rinse+Spin , Spin only options
To Next Page
Loading...
