ption Washing
O
23
Additional Function Program
When you only need the Wash, Wash/Rinse or Rinse cycles, these can be set manually.
Add the laundry into the washing tub.
Press the START/PAUSE button.
Press the WATER button, to control the water level according to the amount
of laundry. If you do not choose anything, it is set the middle water level
automatically.
Add the detergent and close the lid.
3
4
5
6
2
Press the POWER (AUTO OFF) button to turn power on.
START
PAUS E
POWERWER
AUTO OFF
• When a Wash, Wash/Rinse or Rinse only option is selected, after the wash is completed the water will not
be drained off. If you wish to drain the water, press SPIN button and wait until the water in the tub has drained
completely. Then press the START/PAUSE button.
• If you do not specify the water level, then Medium will be automatically selected.
• If only Rinse is selected, the process will start from Water Supply.
NOTE
Press the
RINSE
button to
select the desired times of
rinse.
Only Rinse
Press the
SPIN
button to
select the desired times of
spin.
Only Spin
1
Press the
WASH
button to
select the desired timing.
Only Wash
Press the
RINSE
button to
select the desired times of
rinse.
Press the
SPIN
button to
select the desired times of
spin.
Only Rinse,Spin
When you want to only
drain, wait until the water
in the washing tub drains
completely.
Only Drain
Press the
WASH
button to
select the desired timing.
Press the
RINSE
button to
select the desired times of
rinse.
You can use this option
for preventing wrinkles of
laundry
Only Wash,Rinse
To Next Page
Loading...
Need help?
General
