41
Symptoms Reason Solution
Door is not closed properly.
•
Close the door completely.
If ‘
, , ’ is not released, call for
service.
•
Unplug the power plug and call for
service.
Water overlls due to the faulty
water valve.
•
Close the water tap.
•
Unplug the power plug.
•
Call for service.
Water level sensor has
malfunctioned.
•
Close the water tap.
•
Unplug the power plug.
•
Call for service.
Over load in motor.
•
Allow the washing machine to stand for
30 minutes to allow the motor to cool,
then restart the cycle.
Water leaks.
•
Call for service.
The washer experienced a power
failure.
•
Restart the cycle.
Control Error
•
Unplug the power plug and call for
service.
Is Inlet/outlet hose or drainage
pump frozen?
•
Supply warm water into the tub and
unfreeze outlet hose and drainage pump.
Wet a towel in warm water and apply to
inlet hose.
Do you have problems with
washing or drying your laundry?
•
When the detergent dispenser lid is open,
the washing or drying function is disabled.
Close the detergent dispenser lid tightly.
To Next Page
Loading...
