22
OPERATION
EN
Time and Status Display
Description
a
Programme Status Indicators
• When a washing programme is running, LED for the active stage will blink, and the LEDs for
the remaining stages will remain steady. Once a stage is complete, the LED will turn off. If a
cycle is paused, the active stage LED will stop blinking.
b
Estimated Time Remaining
• When a washing programme is selected, the default time for that programme is displayed.
This time will change as options are selected.
• If the display shows
---
, then the time will be displayed after the load sensing has detected
the load size. This is normal.
• The time shown is only an estimate. This time is based on normal operating conditions.
Several external factors (load weight, room temperature, incoming water temperature, etc.)
can affect the actual time.
c
The LED lights up when the programme starts and the door is locked.
d
The LED lights up when the control panel is locked except for the
Power
button.
global_main.book.book Page 22 Wednesday, May 6, 2020 3:19 PM
To Next Page
Loading...
