40
MAINTENANCE
• After closing the tap, disconnect the cold
supply hose from the tap, and remove water
while keeping the hose facing downwards.
Check for Freezing
• If water does not drain when opening the hose
plug used for removal of residual water, check
the drainage unit.
• Turn the power on, choose a washing
• When ‘ ’ is shown in display window while
the product is in operation, check water supply
unit and drainage unit (Some models do not
have an alarm function that indicates freezing).
NOTE
• Check that water is coming into the detergent
drawer while rinsing, and water is draining
through the drain hose while spinning.
To Next Page
Loading...
