LG WM2487HRM - Page 16

HOW TO USE
THE
WASHER
OPTION
CHILD LOCK
DOOR LOCKED
16
?
Use this
option
for loads that need
pretreatment.
Adds
16 minutes
prewash
and a
spin cycle.
1.
Prewash
?
Displays
whenever the door of the washer is locked.
?
The door can be unlocked
by pressing
the
Start/Pause button to
stop
the washer.
NOTE: If the water
temperature
or the level is too
high,
the
door cannot be unlocked.
Do not
try
to force the door
open
when
is
displayed.
STATUS INDICATOR
?
It shows
elapsed
time of the
cycle
the washer is
operating.
EST. TIME REMAINING
?
This
display
shows the estimated time
remaining
in the
cycle
when
operating.
?
This washer
automatically
detects the wash load
(weight)
and
optimizes
the
washing
time. After
detecting,
the
display
will show the
adjusted
time
remaining.
?
Use this
option
to
prevent
unwanted use of the washer.
Press and hold PRE WASH button for 3 seconds to
lock/unlock control.
?
When Child lock is
set,
"
"
blinks and all buttons are
disabled
except
the Power button. You can lock the
washer while it is
operating.
?
Adds more time to the wash and rinse
cycles
for better
stain removal.
?
Automatically provides
a rinse.
4.
Stain
cycle
?
Adds extra water to the wash and rinse
cycles
for
superior
results.
5. Water Plus
?
The Drum
Light
comes on when the Power button is
pressed.
It
goes
off when the door is closed and the
washer starts
operation.
?
The Drum
Light
remains off when the door is locked.
?
The Drum
Light
can be turned on while the washer is in
operation by pressing
the
Rinse+Spin
button for 3
seconds. The
light
will turn off
automatically
4 minutes
later.
?
The Drum
Light
comes on when the
washing cycle
is
finished and
goes
off 4 minutes later.
6. Drum
Light
?
SPINSENSE
TM
'
can be used when there is a vibration
problem, especially
on wood floor installations.
?
To
operate
SPINSENSE
TM
',
press
and hold the Stain
Cycle
button for 3 seconds when the
washing
machine
is
running
on
any cycle.
?
When SPINSENSE
TM
'
has been
selected,
the
Spin
Speed
button
light
will blink on and off
continually
to
indicate that the SPINSENSE
TM
'
function has been
selected.
?
Push and hold the Stain
Cycle
button
again
for 3
seconds to cancel SPINSENSE
TM
.
?
Once SPINSENSE
TM
'
has been
selected,
if will continue
to function even if
interrupted by
a
power
failure.
7.
SPINSENSE
TM
?
This
option provides
an additional rinse.
?
Use this
option
to ensure the removal of
detergent
or
bleach residue from
garments.
3. Extra Rinse
?
Use this
option
to rinse and then
spin.
2.
Rinse+Spin