22 USNG YOUR WASHING MACHINE
USING YOUR WASHING MACHINE
Basic operation
Load the laundry into the washing machine and close the door.
Press \ 9.
- The lights around the cycle selector knob will illuminate and a chime will sound
Turn _£..)_ to the desired cycle.
- The proper default option is automatically set according to the wash cycle See page 23, Cycle
guide, for more detailed default options for each cycle
- See page 24, Main cycle, for details on the wash cycles
- To change the options, press the option button and select the desired option See page 25,
Setting options before cycle, for more details on options
- Skip to step 4 to use the default setting without changing the options.
Add the proper amount of detergent and additions (bleach, softener) into the detergent dispenser
drawer
- See page 20, Using detergent!fabric softener, for more details on using detergent
P .... _,/J,l_
- The washing machine will start
n_
When the melody plays, the wash cycle is finished
- When the washing cycle is finished, the door will unlock Open the door and remove the
laundry immediately
- Make sure to check around the door seal when taking out the finished load. Small items may
be caught in the door seal
y A WARNING ............................
,, To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before
j operating this appliance.
,--@NOTE
. The front-load washing machine rotates the laundry in a way that allows it to use less water while still fully saturating your
j clothing. It is normal to not be able to see water during the wash cycle.
. If the temperature or the water level inside the machine is too high, the door locks and cannot be opened. To open the door
i while washing, use the Rinse + SPIN feature
To Next Page
Loading...
