Test operation
9
11
1
Preparation
for
washing.
· Connect the power plug to the
outlet.
· Connect the inlet hose.
2
Press the power button.
3
Press the START/PAUSE
button.
6
Check the water heating.
· Press the Option(Left) + Temp.
button simultaneously and the
present temperature will be
displayed.
Page 13
· Check if the drum rotates
clockwise and counterclockwise.
5
Check automatic reverse turn.
4
Check the water supply.
· Check if water is supplied through
the detergent dispenser.
7
Check drain and spin.
8
Power off and open the
door.
9
Water removal.
· If SVC is needed during check,
remove the remaining water by
pulling out the hose cap.
· In case of Coloreds program.
· Turn power off and then power on.
· Select the spin rpm
· Press the START PAUSE button.
· Check the spin and drain
functions.
· Turn power off and then power on.
· To turn off, press the power button
for 1sec
· Listen for a click to determine if the
door is unlocking.