LG WM3570H - HOW TO CLEAN THE TUB USING TAG ON

33
ENGLISH
USING YOUR WASHING MACHINE
#
$$
Laundry Stats
Laundry status can tell you when the next Tub Clean
cycle is needed for your washer
and also tell you details of your
last 10 cycles.
1 Select ‘Tag On’ by using the
top icons or the bottom
icons.
2 Select ‘Laundry Stats’.
3 When the Tag On screen
appears (see at right), tap
your smart phone to the Tag
On logo on the right side of
the washer’s or dryer’s
control panel.
- If the app does not
recognize the appliance’s
Tag On logo, touch the
[
Tag On logo, touch the
] in the upper right
corner of your
smartphone’s screen to see
the detailed guide. (This
might happen due to the
different NFC antenna
positions for each phone.)
* Images are for reference only.
The LG Smart Laundry& DW
application may be updated.
#
$$
H ow to Clean the Tub using Tag On
1
Select ‘H ow to clean the
tub’ in the Laundry Stats
screen.
2 Follow the instructions on
the phone to see how to
prepare the machine for
Tub Clean.
3 Select ‘Start Tub Clean
cycle’ at the bottom of the
screen.
4 When the Tag On screen
appears (as below), tap
your smart phone to the
Tag On logo on the right
side of the washer’s or
dryer’s control panel.
5 V erify that the Tub Clean
cycle has begun.
* Images are for reference
only. The LG Smart
Laundry& DW application
may be updated.