19
ESUACMO T P M Y SRORR E
LOCKED MOTOR
ERROR
EEPROM ERROR
•The connector (3-pin, male, white) in the MOTOR
HARNESS is not connected to the connector (3-pin,
female, white) of STATOR ASSEMBLY.
•The electric contact between the connectors (3-pin,
male, white) in the MOTOR HARNESS and 4-pin,
female, white connector in the MAIN PWB
ASSEMBLY is bad or unstable.
• The MOTOR HARNESS between the STATOR
ASSEMBLY and MAIN PWB ASSEMBLY is cut
(open circuited).
•The hall sensor is out of order/defective.
8
• EEPROM is out of order.
Displayed only when the START/PAUSE button is
first pressed in the Load Test Mode.
9
gn i hsaw e l i hw deppo t s s i y l ppus r ewop eh t r e t f A•ERU L I AF REWOP
machine is working, the power is supplied rapidly.
10
To Next Page
Loading...
