Why is no water going into my LG WM3997H*A Washer?
If water is not being supplied to your LG washer or the water pressure is low: * Ensure the faucets are turned on. * If a faucet is frozen, thaw it with warm water. * Clean the inlet filter if it's clogged. * Make sure the water line is properly connected to the cold water inlet. * Check that the water lines are not pinched or bent.
Why is my LG WM3997H*A Washer not turning on?
The LG Washer might not be turning on because the power cord isn't properly plugged in. Ensure it's securely in a grounded 3-prong, 120 V (60 Hz) outlet. Also, check if a house fuse has blown, a circuit breaker has tripped, or a power outage has occurred. Reset the circuit breaker or replace the fuse. If it's a circuit overload, have it corrected by a qualified electrician.
How to fix LG Washer tub that does not rotate?
If the tub of your LG Washer isn't rotating, ensure the door is closed and secured. If the issue persists, unplug the power and contact your nearest LG service center. It could also be due to overloading. Rearrange the load size and restart the washing machine. If the load is too big, the tub may not rotate due to an overheated motor. Allow the washing machine to stand for a while and restart the cycle. Unplug the power cord and contact your nearest LG service center if the same error message appears.
What to do if my LG WM3997H*A drains slowly or not at all?
If your LG Washer is draining slowly or not at all, it might be due to several reasons. First, check if the drain hose is installed over 3 1/4 feet (1 m) beyond the end of the elbow bracket; if so, lower it to within 3 feet below the end of the elbow bracket. Also, inspect the drain hose to ensure it is not pinched or clogged. Place the drain hose on a smooth surface to prevent bending. If the drain hose is frozen, thaw it in warm water. Finally, check if the drain hose is clogged with foreign objects; if so, open the drain pump plug cap and remove the dirt.
How to clean the tub in my LG WM3997H*A Washer?
To clean the tub of your LG washer, empty the tub and insert bleach into the detergent dispenser and select the Tub Clean cycle. If you want to skip the Tub Clean, turn the CYCLE SELECTOR KNOB or push the option buttons to select a cycle.
How to balance load in LG Washer?
If clothing has gathered on one side of the tub in your LG washer: * Rearrange the items to help balance the load. * If you washed a stuffed animal, mat, or knitwear, rearrange the knitwear to help balance the load and drain it again. * Put one blanket in at a time.
What to do if the LG WM3997H*A Washer door won't open?
If the door of your LG washer doesn't open after the cycle pauses or finishes, it is because the washing machine has a safety lock. Leave the door closed and wait until the door lock icon disappears from the display. You can also allow the washer to complete the programmed cycle, or press the SPIN button.
Why won't the tub rotate in my LG Washer?
If the tub in your LG washer isn't rotating: * Rearrange the load and restart the washing machine. * If the load size is too big, the tub may not rotate due to an overheated motor. Let the washing machine stand for a while, then restart the cycle.
What to do if LG WM3997H*A is leaking water?
If you notice water leaking around your LG washer: * Check the faucets and water lines for leaks. * Unclog the drain pipe or drain hose.
How to fix LG Washer that won't turn on?
If your LG washer won't turn on: * Ensure the plug is securely in a grounded 3-prong, 120 V (60 Hz) outlet. * Reset the circuit breaker or replace the fuse. * Do not increase the fuse capacity; if it's a circuit overload, have it corrected by a qualified electrician.
Describes the inverter direct drive motor for optimal wash performance with low noise and vibration.
Explains the washer's capability to transmit diagnostic data for troubleshooting via app or call center.
Describes the option to disable controls during a wash cycle to prevent children's interference.
Details the use of steam cycles with high temperatures to help remove tough stains.
Provides essential safety guidelines to reduce the risk of fire, electric shock, or injury.
Explains the importance and procedure for grounding the washing machine for safety.
Covers critical safety warnings and precautions related to the installation process.
Details safety guidelines for operating, maintaining, and disposing of the washing machine.
Describes the various buttons, selectors, and display elements on the control panel.
Explains the functions of buttons, options, and the main display indicators during operation.
Step-by-step instructions for loading, selecting cycles, and starting the washing machine.
Shows recommended fabric types and options for each wash cycle.
Explains how to customize wash cycles using buttons for temperature, spin, and soil level.
Guides on selecting water temperature, spin speed, and soil level before starting a cycle.
Explains how to use the Tub Clean cycle to remove residue, mildew, or musty smells.
Details the process of cleaning the drain pump filter to prevent drainage issues.
Lists common error messages, their possible causes, and recommended corrective actions.
Provides a checklist of common problems and solutions to try before contacting service.
To Next Page
General
