31MAINTENANCE
ENGLISH
2 Turn off the faucets connected to the water
inlet hoses.
3 Pour hot water on the frozen faucets to thaw
the water inlet hoses and remove the water
inlet hoses.
4 Immerse the water inlet hoses in hot water to
thaw them.
5 Reconnect the water inlet hoses to the water
inlets of the washer and to the faucets.
•See Connecting the Water Inlet Hoses for
details.
6 Turn on the faucets.
7 Press the Power button to turn on the
washer.
8 Turn the knob to select Spin only cycle for
draining and spinning.
9 Press the Start/Pause button.
When the Drain Hose Is Frozen
1 Pour hot water in the washer drum and close
the door.
2 Wait for 1 - 2 hours.
3 Press the Power button.
4 Turn the knob to select Spin only cycle for
draining and spinning.
5 Press the Start/Pause button to make sure
the water drains.
us_main.book.book Page 31 Thursday, June 9, 2022 1:51 PM
To Next Page
Loading...
