16
3-3. FUNCTION OF EACH BUTTON
•
This button
allows
you to store a
customized
wash
cycle for
future use .
• Delayed finishing time.
•
The time increases when the button
is pushed.
• The following settings are
indicated as the button is pushed 1
→ 2 →3 → 4 → ... 24→
→ Reservation off
1 ...
• To cancel delay time, turn the
power switch off or push DELAY
WASH button until off.
DELAY WASH (Selection)
BUTTON
Custom Program
BUTTON
•
Select to select Water
(Wash/Rinse) Temperature.
•
Pressing the button allows
The selection of TAP COLD
→
COLD
→
ECO WARM
→
WARM
→
HOT
respectively. Default setting
is Warm/Cold.
WASH / TEMP.
Note
The time shown on the display is the estimated cycle time. If the sensors and microprocessor elect to
make changes during the cycle, the display will be adjusted accordingly.
POWER
• Power on.
• Push again, power goes off
• Power goes off automatically after the wash
is finished.
• After turning the power on, the unit will
automatically turn off if nothing is selected.
CYCLE BUTTON
• Use for selecting wash program.
• This button allows the selection of 14 different
programs for different kinds of laundry and
dirtiness.
•
Program selections light up in sequence as
follows: Normal→Heavy Duty→ →Bedding
→
Sanitary
Bright Whites™→
→ → →
→
Pre Wash+ Normal
Delicates Towels
Tub Clean
→
→
→
Select
Waterproof Perm.Press
Speed Wash Downloaded the desired
program by ressing the button.
To Next Page
Loading...
