41
14) Power is automatically turned off during operation or immediately
turning on the power switch.
Where, what, and how to check? Result of Check Possible Cause How to repair and settle
Main v
oltage
1. It is mostly caused by line noise or
power cut.
AUTO OFF switch or
Controller
1. It would be defect of the controller if
power is automatically turned off
immediately when turning on the
power switch even though there is
no defects in the AUTO OFF switch.
Defect in main.
Explain the cause.
(It happens specially
when a high frequency
equipment is used
around the washer or in
the case voltage
fluctuation is big.)
Change the controller.
To Next Page
Loading...
