25
AU
Option Programme
Soil Level
• This button allows you to select the strength
of the wash action.
• There are 2 levels for Soil Level selection :
Heavy and Light. This can be selected for any
programme.
• If you do not select the Soil Level, it will be in
the Normal state with the light turned off.
• Adjustment can be made while washing.
Temp.
• If you want to to select water temperature,
press the Temp. button to allow you to select:
Cold → Warm (Hot & Cold) → Hot → Cold
respectively.
• Default setting is Cold.
Water Level
• Press the Water Level button to adjust water
level. This may be required to avoid linting
and unbalanced errors when the load is bulky
but lightweight.
• It can be changed during operation.
• This machine detects the quantity of laundry
automatically, then sets Water Level. It may
be necessary to increase the water level
manually when washing bulky light weight
clothes.
• When you select a wash programme, the
Water Level will be shown on the control
panel.
• When Water Level is automatically detected, it
may differ depending on the quantity of
laundry even though the same Water Level is
indicated on the control panel.
Wash
• Press the Wash button to change the wash
time.
• Adjusting the wash time setting will modify the
cycle times and/or wash actions. Press the
Wash button until the desired wash time is
selected.
Rinse
• Press the Rinse button to change the number
of rinses.
Spin
• Press the Spin button to change spin
strength.
• Press Start/Pause button to indicate
remaining time.
To Next Page
Loading...
