LG XBOOM Go XG9QBK - Connecting Two Bluetooth Devices

14
Connecting Two Bluetooth Devices to the Speaker
Multi phone pairing
a Connect one Bluetoothdevicetothespeakerrst.([ See “Connecting Smartphone to the Speaker via
Bluetooth” on page 11.)
b When the Bluetooth device and speaker are connected, press and hold Bluetooth
button for 2 seconds.
Then Bluetooth LED blinks with the sound. The speaker is changed to multi phone pairing mode.
c Connect a different Bluetooth device to the speaker within 1 minute. ([ See “Connecting Smartphone to
the Speaker via Bluetooth” on page 11.)
d Once both the Bluetooth devices are connected to the speaker, the Bluetooth LED turns on.
Note
• Up to two Bluetooth devices can be connected to the speaker at the same time.
• When two Bluetooth devices are connected at the same time, the speaker channels the sounds of only one of
them.Youneedtostoptheplaybackontherstdevicetoplaythesoundsoftheotherone.
• If you turn the speaker off and back on while two Bluetooth devices are connected, only the device connected
later is automatically connected.