16
Using Voice command
You can turn on the Google Assistant or Siri function on your smartphone and use voice command through the
speaker’s microphone.
Please check the following rst.
• Use a smart device that provides a voice command function.
• This function may not work depending on the Bluetooth device.
a Connect the smartphone to the speaker via Bluetooth. ([ See “Connecting Smartphone to the Speaker via
Bluetooth” on page 11.)
b Press and hold the Play/Pause
button for 2 seconds.
c Say a desired voice command for Google Assistant or Siri close to the speaker’s microphone.
Note
• While the hands-free function is being used, this function is disabled.
• If the voice command time limit is exceeded on the smartphone, the function is disabled automatically.
• Android devices may not support this function in some countries according to Google policies.
• If voice command does not work, check the smartphone.
To Next Page
Loading...
