LG XBOOM Go XG9QBK - Speaker Power Management Features; Using Auto Power Management

28
Using Auto Power Management
• When the charging cable is plugged in: If there is no input signal or button operation, the speaker turns off
automatically after 15 minutes.
• When the charging cable is not plugged in: If there is no input signal or button operation, the speaker turns off
automatically after 6 hours.
The Auto Power Management function can be enable or disable as shown below.
Function How to Use
Enable
Press and hold Power
and Volume buttons for 2 seconds simultaneously.
• The PowerLEDwillblinkvetimeswithbeepsound.
Disable
Press and hold Power
and Volume buttons for 2 seconds simultaneously.
• The PowerLEDwillblinkvetimeswithbeepsound.
Note
• You can enable or disable this function on the LG XBOOM app.
• When using the Wireless Party Link, the Auto Power Management time works for 15 minutes (plugged in) or 6
hours (not plugged in) depending on the charging cable connection status of the Main speaker.
• If this function is disabled, the speaker turns off only when the Power
button is pressed or the battery is
discharged.