LGMG North America Inc.
Operation and Safety Manual
7
Slope
⚫ Do not drive the machine on a slope
that exceeds the slope and side
slope rating of the machine. The
rated value of slope is applicable to
a stowed machine. Refer to Chapter
10 – Specifications.
△
! Falling Hazards
⚫ All workers in the platform must use
approved safety harnesses and
attach the lanyard to the provided
anchor points in the platform. Each
anchor point is limited to one
lanyard.
⚫ Do not climb on or sit on the guard
rail of the platform. Firmly stand on
the platform floor at all times.
⚫ Do not climb down the platform
scissors when the machine is
elevated.
⚫ Keep the platform floor free from
debris.
⚫ Shut down the platform door before
operation.
⚫ Do not operate the machine if the
guard rail is not correctly installed.
⚫ Do not enter or exit the platform
unless the machine is in the stowed
position.
△
! Crash Hazards
⚫ Pay attention to any items or
obstacles within the machine’s sight
line and in any blind spots when
starting or running the machine.
⚫ Pay attention to the position of the
extending platform when moving the
machine.
To Next Page
Loading...
Need help?
General
