Need help?Do you have a question about the Lian-Li O11 DYNAMIC XL and is the answer not in the manual?
General| Form Factor | Full Tower |
|---|---|
| Expansion Slots | 8 |
| PSU Support | ATX (up to 220mm) |
| CPU Cooler Height | 167mm |
| GPU Length | 446mm |
| Motherboard Support | E-ATX, ATX, Micro-ATX, Mini-ITX |
| Material | Aluminum, Tempered Glass |
| Cooling Support | Rear: 1 x 120mm |
| Radiator Support | Side: 360mm, Bottom: 360mm, Rear: 120mm |
| Front I/O Ports | 1 x USB 3.1 Type-C |
| Dimensions | 471mm x 285mm x 513mm (L x W x H) |
Details front panel I/O ports: USB 3.0 x2, HD Audio, Mic, USB 3.1 Type-C.
Covers power/reset buttons, ARGB control, and LED strip.
Specifies support for fans (120mm/140mm) and radiators (up to 360mm).
Details removable and hot-swappable trays for SSDs, HDDs, and PSUs.
Various types of screws for mounting motherboards, SSDs, PSUs, and fans.
Includes stand-off bolts for motherboards and rubber pads for PSU mounting.
Features Velcro for organizing cables.
Provides a bracket to prevent graphics card sag.
Includes tools and extra parts for installation.
Instructions for detaching the top panel of the computer case.
Guide on how to remove the side and front glass panels safely.
Guidance on installing the power supply unit into the chassis.
Details the wiring and connection guide for front panel cables and LEDs.
Instructions for mounting the motherboard inside the case.
Steps for installing 2.5 inch SSDs and 3.5 inch HDDs into the drive bays.
Detailed instructions for mounting 2.5 inch SSDs in various locations.
Steps for installing the LED control board and its connections.
Guide for installing the bracket to support graphics cards.
Guidance on organizing and routing cables for a clean build.
Instructions for removing and cleaning magnetic dust filters.
Explains the functionality of USB, HD Audio, and ARGB ports.
Details the support for radiators and cooling systems.
Introduces optional kits like Upright Display Card Kits and Extension Panels.
To Next Page
