10
You can liberate the music from
your PC/MAC without blinking.
Just follow these simple steps:
1. Plug the USB transmitter in
your computer.
2. Make sure that your BEAT
speaker is listed as “SKAA USB TX”
sound source in the control panel
on your PC/MAC.
For the most part this will happen
automatically.
3. Play your music, audio books,
movies or games.
4. Press the button on your BEAT
speaker to bond, if you haven’t
used the transmitter before. This
makes it a known source.
(Press once if it is the first trans-
mitter you use with your BEAT
speaker. Twice if it’s not).
The range of the transmitter is up
to 30 m in open space.
To Next Page
Loading...
