LIFAN Power USA 160F User Manual

160F
168F
168F-2
168F-D
168F-2D

LIFAN Power USA 160F Specifications

General

Displacement	163 cc
Bore x Stroke	68 mm x 45 mm
Compression Ratio	8.5:1
Fuel Type	Gasoline
Oil Capacity	0.6 liters
Starting System	Recoil Start
Weight	15 kg
Ignition System	Transistorized magneto ignition
Engine Type	Single Cylinder, 4-Stroke, OHV
Max Power	3600 rpm
Max Torque	2500 RPM
Fuel Tank Capacity	3.6 liters
Dimensions (L x W x H)	335 mm

Summary

Preface

Safety Precautions

Engine Parts Description

Battery Connection

Remote Control Connection

Pre-Operation Inspection

Engine Oil Check

Procedure for checking and adding engine oil, including recommended type SAE10W-30.

Reduction Gear Box Oil Check

Steps to check the oil level in the reduction gearbox, noting its capacity.

Air Cleaner Maintenance

Guide to cleaning or replacing filter elements for different air cleaner types.

Fuel and Fuel Tank Checks

Information on fuel type, capacity, and checking the fuel level in the tank.

Engine Starting and Operation

Engine Starting Procedure

Step-by-step guide to starting the engine using the fuel cock, choke, and starter.

Engine Operation Guide

Instructions for preheating and setting the throttle lever for required engine velocity.

Engine Stopping Procedure

Standard and emergency procedures for stopping the engine safely and correctly.

Exhaust Control System

Exhaust System Maintenance

Guidelines for maintaining the exhaust system in accordance with emission standards.

Exhaust System Replacement Parts

Recommendation to use manufacturer-approved parts for exhaust system effectiveness.

Exhaust System Modification

Warning against illegal modifications that may affect emission limits.

Exhaust Emission Problems

Common issues affecting exhaust emissions and recommended actions.

Engine Maintenance

Maintenance Schedule

A comprehensive schedule detailing maintenance items and their frequencies.

Engine Oil Replacement

Step-by-step guide for draining and refilling engine oil.

Air Cleaner Service

Procedures for cleaning and servicing different types of air cleaner elements.

Washing of Deposit Cup

Instructions for removing, washing, and reinstalling the deposit cup.

Spark Plug Servicing

Guide to removing, cleaning, measuring clearance, and installing the spark plug.

Spark Eliminator Maintenance

How to service the optional spark eliminator to maintain its condition.

Carburetor Idling Adjustment

Steps to adjust the carburetor idling speed for optimal engine performance.

Engine Transport and Storage

Engine Transport Guidelines

Safety precautions and procedures for transporting the engine.

Engine Storage Procedures

Recommendations for storing the engine properly for long periods.

Engine Removal from Storage

Steps and service items required before reusing a stored engine.

Engine Troubleshooting

Starting Engine Difficulties

Common causes and remedies for engines that are difficult to start.

Low Power Output

Troubleshooting steps for engines experiencing reduced power output.

Unsmooth Engine Running

Solutions for engines that do not run smoothly or exhibit knocking.

Sudden Engine Stoppage

Causes and fixes for the engine stopping suddenly during operation.

Engine Overheating

Diagnosing and resolving issues causing the engine to overheat.

Abnormal Engine Noise

Identifying and fixing sources of abnormal noises during engine operation.

Engine Specifications

Main Design Specifications

Key technical data including dimensions, weight, displacement, and power.

Adjustment Data

Specifications for spark plug, carburetor idling, and valve clearance adjustments.

Valve Timing

Details on intake and exhaust valve opening and closing timings.

Bolt Tightening Torque

Engine Electric Diagram