Lifan M13E - Page 8

O
Make
sure not to
connect the battery
leads in teverse
order, or short-circuit
or breaker's cutting
may
result.
Start relay
CONTROL
CONNECTION
OF
REMOTE DTSTANCE
(OpTrON)
The holes in levers
of both the
choke and
throttle are used for mounting
optioned steel wires. The diagrams
shown illustrate
how to
mount a solid steel wire and a meshed steel wire. If choosing a meshed
steel wire, a
retaining
spring is in need.
If necessary
you
may
screw loose the damping nut on the throttle lever slightly
when coritrolling the throttle by
a remote-controlled
steel wire
5