LIFAN X60 Service Manual
cage-shaped body frame is equipped with laser welded stiff steel plate of variable
thickness. Both the rear and the front of the vehicle body are provided with impact
absorption functions.
2. The inner trim parts adopt fire-retardant and recyclable engineering plastics and
textiles with high strength and environment-friendly odor.
3. A/C system: Manual adjustment type A/C with outer circulation air intake filter
layer replaceable periodically.
4. Rearview mirror: Anti-dazzling type interior rearview mirror and electric exterior
rearview mirror.
Electrical Equipment
The electrical equipment of LIFAN X60 series models is provided with a single wire
system, negative earth, DC, and a rated voltage of 12V.
Engine and Electronic Fan
The electronic cooling fan of engine adopts the arrangement of two-stage speed
regulation dual fan.
Power Start and Charging System
Battey: 80 Ah maintenance free lead-acid battery;
Alternator: 14V/90A integral alternator with built-in voltage regulator.
Starter: 1.4kw permanent magnetic starter.
Ignition EFI system
Ignition switch: electrical starting
The electronic fuel injection (EFI) system of engine adopts the MT22.1 EFI system
of Delphi Corp., so the standards of EFI shall prevail. The main components of EFI
system include: engine control unit (ECU); sensors: intake pressure temperature
sensor, knock sensor, oxygen sensor, camshaft position sensor, crankshaft position
sensor, coolant temperature sensor, accelerator pedal position sensor, throttle
position sensor and weak acceleration sensor; and actuators: electronic throttle valve
mashinesoft.com
09120146259
To Next Page
Loading...
