Need help?Do you have a question about the Life Smart LS100 and is the answer not in the manual?
General| Model | LS100 |
|---|---|
| Category | Hot Tub |
| Material | Acrylic |
| Power Supply | 240V |
| Temperature Range | 26-40°C |
| Included Accessories | Cover |
General safety precautions and warnings for spa users.
Specific safety measures to protect children from spa hazards.
Instructions to prevent electrical shock and ensure safe wiring.
Safe electrical setup and GFCI testing for 110V plug-in models.
Safe electrical installation and GFCI testing for 230V hard-wired models.
Highlights severe electrical shock risks and installation rules.
Details potential dangers like suction entrapment, slipping, and medication effects.
Warns about medication interactions and potential health risks during spa use.
Advises consulting a doctor for pre-existing health conditions before spa use.
Emphasizes water chemistry, recommended levels for chlorine, pH, alkalinity, and hardness.
Explains hyperthermia risks and safe temperature limits for spa users.
Provides guidance on checking water temperature to prevent skin burns.
Key instructions for proper spa care, maintenance, and usage.
Factors to consider when selecting a suitable spa location.
Ensuring access and compliance with safety codes and requirements.
How intended use influences spa placement and surrounding area.
Considerations for surrounding views and neighbor privacy.
Thinking about the direction and landscape visible from the spa.
Climate considerations, shade, ventilation, and moisture management.
Preventing dirt and foliage from entering the spa area.
Planning for equipment access for maintenance and repairs.
Importance of a solid foundation to support the spa and prevent settling.
Foundation support is the owner's responsibility; proper drainage is crucial.
Recommends professional installation for the foundation pad.
Specific requirements for indoor installations, including humidity and ventilation.
Physical placement of the spa unit.
Ensuring the spa fits through delivery routes and access points.
Checking for obstructions along the path to the installation site.
Details on how to open the equipment access panel.
General warnings and requirements for spa electrical installations.
Specific requirements for 110V spa power supply and outlets.
Specific requirements for 230V spa power supply, grounding, and breakers.
Emphasizes hard-wiring for 230V spas and warnings against extension cords.
General warning about not servicing components and contacting professionals.
Steps for setting up the spa's electrical configuration.
Details for 110V cord-connected installations and extension cord warnings.
Information on voltage options and heater output for specific models.
Instructions for converting to 30A/110V or 50A/230V configurations.
Visual guide for 230V spa wiring connections and breaker setup.
Describes the startup mode and initial system behavior.
How to set and adjust the spa water temperature.
How to operate the spa jets on 230V and 110V models.
Instructions for controlling the spa's LED lighting modes.
Information about the spa's automatic filter cycles.
How to program the duration of the filter cycles.
How manual jet or light activation affects filter cycles.
Explanation of different operating modes like Standard, Economy, Sleep, Quiet, and Off.
Specific instructions for setting Economy Mode on LS700DX model.
How to switch between Fahrenheit and Celsius temperature displays.
Explains error codes and messages displayed on the control panel.
Overview of spa components and their controls.
Function and operation of the air control valve for jet pressure.
How to use the diverter valve to direct water flow to different jet sets.
How to adjust individual hydrotherapy jets for desired effect.
Information on the ozone system's role in water sanitation.
How to operate the waterfall feature if equipped.
Procedures for safely filling the spa with water, including leak checks.
Steps for connecting power, checking for leaks, and setting temperature.
Importance of water chemistry and potential warranty issues.
Instructions for setting and adjusting the spa's pH level.
Guidance on measuring and adjusting total alkalinity for pH control.
How to measure and adjust calcium hardness for water balance.
Instructions for sanitizing the spa water with chlorine or bromine.
Procedure for performing a weekly shock treatment to maintain water quality.
How to clean and maintain the spa filter cartridge for optimal performance.
Step-by-step guide for removing, cleaning, and replacing the filter cartridge.
Recommended methods for cleaning the spa's interior surface.
How to properly clean and care for the spa cover.
Maintenance advice for the spa's exterior cabinet.
Instructions for replacing the spa's LED light assembly.
Important safety precautions before draining the spa.
Step-by-step guide on how to drain the spa water.
Instructions for winterizing the spa to prevent freeze damage.
Steps to diagnose why the spa is not powering on or operating.
Troubleshooting for pump issues when the light is functional.
Tips to improve jet performance and water flow.
Diagnosing and resolving issues with overheated spa water.
To Next Page
