UA-787 QUICK START CARD
1-888-726-9966 (In USA)
1-800-463-5414 (In Canada)
www.LifeSourceOnline.com
LifeSource is a trademark of A&D Medical.
© 2009 A&D Medical. All rights reserved. 8/09
1. Lay left arm on the table with palm up. Place the
semi-hard cuff shell on upper arm.
2. Fasten the cuff tight enough so you can slide two
fingers under the cuff.
3. Sit comfortably with arm resting on a flat surface,
palm up.
4. Press START button. (Battery installation required
or AC Power Adapter connection required)
5. Sit quietly as cuff inflates.
6. Wait for a measurement completion.
7. When measurement is complete, the cuff deflates
automatically.
8. The systolic and diastolic pressure and pulse rate
appear on the digital display.
To Next Page
Need help?
General
