5. The machine must not stand on a strong (high-pile) carpet, otherwise ventilation
will not work properly.
6. Unbalanced power may cause errors. Please do not use the same electrical
outlet as for computers, air conditioning, etc.
7. Regularly check all bolts and nuts if are proper tightening. Regularly check all
parts if damaged, do not use the machine, replace the damaged parts immediately,
or contact your dealer. Ensure that none of the setters protrudes, as it could be a
hindrance to movement.
8. Before removing the belt guard, make sure the main switch is off and the
machine is disconnected from the mains.
9. If a supply cable fails, replace with the lead cable provided by the
manufacturer/importer of the treadmill. Please contact your local distributor for
replacement.
10. When handling the machine, beware of children and objects.
11. There is a risk of electric shock or death when water comes especially to the
engine, power cord or plug.
12. Disconnect the device from the electrical outlet when not in use.
13. Disconnect the treadmill from the electrical outlet if you are servicing or
changing parts on the device.
14. Do not switch on the device if it is folded. Do not place any objects on the belt.
15. Save this manual for later reference and ordering spare parts.
To Next Page
Loading...