Lifeline PRO HALF RACK C1 - Attachment Assembly; Attachment Assembly Diagram; Final Tightening and Spotters

8
Step 2 (See Diagram 2)
a) Attach Left Pull-up Handle (9) to the Upper Cross Frame (5) using two Hex Head Bolts (20),
four Washers (17), and two Hex Head Nuts (18).
b) Repeat step a) for Right Pull-up Handle (10).
Diagram 2. Attachment Assembly
Step 3
a) Check the assembly against illustrations and tighten all nuts and bolts securely.
b) Attach Safety Spotters (13 and 14) and Bar Hooks (11 and 12) onto the assembled frame
per Diagram 2.