EasyManua.ls Logo

Lifemax 331 - User Manual

Default Icon
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Under Pillow Vibration
Alarm Clock
SKU: 331
Thank you for purchasing a Lifemax Under Pillow Vibration Alarm Clock. We
hope you’ll get many years of use from this product. We recommend you
read this document thoroughly to familiarise yourself with how your product
works, how you should use it safely and effectively and how to look after
your product to ensure it continues working as it should.
Instruction Manual
www.lifemaxuk.co.uk
Document Version No
Warranty Information
Your Lifemax product is guaranteed for one year against defective parts or
construction. This guarantee is from the date of purchase and is only valid with
proof of purchase, Please note this guarantee does not cover normal wear and
tear or damage caused by accident or maltreatment. The extended rights of this
guarantee are in addition to the consumer statutory rights and do not limit the
effect of these statutory rights.
Please register your product at https://www.lifemaxuk.co.uk/warranty.
Technical Specification
Model No 331 Battery Type 2 x AAA
Alarms 1 Size 93 X 70 X 15mm
This is a WEEE symbol. It indicates that when the end-user discards this product,
it must be sent to separate collection facilities for recovery and recycling. By
separating this product from other household-type waste, the volume of waste
sent to incinerators or land-fills will be reduced and natural resources will thus
be conserved. Lifemax Ltd provide an end-of-life solution for this product when
sold in the UK by accepting back any end of life items for processing by a local
registered waste disposal company.
331IM28022023.indd 1-2331IM28022023.indd 1-2 28/02/2023 11:10:1928/02/2023 11:10:19
Question and Answer IconNeed help?

Do you have a question about the Lifemax 331 and is the answer not in the manual?

Overview

The Lifemax Under Pillow Vibration Alarm Clock (SKU: 331) is a specialized alarm clock designed to wake even the deepest sleepers, particularly those with hearing loss or shift workers, through vibration. This device is placed under a pillow and provides a strong vibration to ensure the user is roused.

Function Description:

The primary function of this alarm clock is to provide a silent, vibrating alarm. It can also function as a traditional alarm clock with an audible buzzer, or a combination of both, offering flexibility based on user preference. The device features a digital display that shows the current time, alarm time, and date. It includes a backlight for easy viewing in low-light conditions. A key lock function prevents accidental changes to settings, which is particularly useful for an under-pillow device.

Important Technical Specifications:

  • Model No: 331
  • SKU: 331
  • Power Source: 2 x AAA batteries (not included)
  • Dimensions: 93 X 70 X 15mm
  • Alarm Type: Vibration, Buzzer, or both
  • Display: LCD with backlight
  • Warranty: 1 year against defective parts or construction from the date of purchase, valid with proof of purchase. Excludes normal wear and tear, accident, or maltreatment.

Usage Features:

The device is designed for intuitive use with clearly labeled buttons and switches.

  • Display (1): Shows time, alarm time, and date. The hour setting can be displayed in either 12-hour (with AM/PM indicator) or 24-hour format.
  • Snooze/Light (2): Activates the display backlight and provides an 8-minute snooze function when the alarm sounds.
  • Up (3) & Down (4): Used to adjust minutes, hours, year, and month during time and alarm setting.
  • Alarm On/Off (5): A button on the front of the alarm to activate or deactivate the alarm.
  • Alarm Set (6): Press and hold for 2 seconds to enter alarm set mode. The hour will flash, allowing adjustment with the UP/DOWN buttons. Press again to set minutes.
  • Clock Cal Set (7): Press and hold for 2 seconds to enter time set mode. The minute will flash, allowing adjustment with UP/DOWN buttons. Press again to advance to hour, then year, then month settings, adjusting each with UP/DOWN buttons. Press again to confirm and complete time setting.
  • Buzzer/Vibration Selector Switch (8): Located on the back of the alarm, this switch allows the user to choose between buzzer and vibration, just buzzer, or just vibration for the alarm.
  • Key Lock Selector Switch (9): Located on the back, this switch locks the UP, DOWN, CLOCK CAL SET, and ALARM SET keys to prevent accidental changes. It must be switched to the unlocked position when setting the clock.
  • Battery Compartment (10): Houses the 2 x AAA batteries.
  • Stand (11): Allows the clock to be placed upright on a surface.

Setting the Time:

To set the time, press and hold the CLOCK CAL SET button for 2 seconds. The minutes will flash, and can be adjusted using the UP/DOWN buttons. Press CLOCK CAL SET again to advance to the hour setting, then year, then month, adjusting each with the UP/DOWN buttons. Press CLOCK CAL SET again to confirm and complete the time setting.

Setting the Alarm:

To set the alarm, press and hold the ALARM SET button for 2 seconds. The hour will flash, and can be adjusted using the UP/DOWN buttons (note: the hour setting respects the 12/24-hour format of the home screen; if in 12-hour mode, AM/PM will be visible). Press ALARM SET again to advance to the minute setting, and adjust with UP/DOWN buttons. Press ALARM SET again to confirm and return to normal display mode. The alarm can be activated or deactivated using the ALARM ON/OFF button on the front, and the alarm type (buzzer, vibration, or both) can be selected via the BUZZER/VIBRATION selector switch on the back.

Maintenance Features:

  • Battery Replacement: The product uses 2 x AAA batteries. Users are advised to use only the designated battery type, avoid mixing battery types (old and new, or rechargeable and non-rechargeable), and replace all batteries at the same time. Batteries should be installed observing polarity (+/-).
  • Battery Safety: Remove batteries if the product will not be used for an extended period to prevent leakage. Exhausted batteries should be removed promptly. Do not short out battery contacts, dispose of batteries in fire, or immerse the product in water or other liquid.
  • Cleaning: The device should be wiped clean only.
  • WEEE Compliance: The product features a WEEE symbol, indicating that it must be sent to separate collection facilities for recovery and recycling at the end of its life. Lifemax Ltd provides an end-of-life solution in the UK by accepting back items for processing by a local registered waste disposal company.
  • Product Registration: Users are encouraged to register their product at https://www.lifemaxuk.co.uk/warranty.

Lifemax 331 Specifications

General IconGeneral
BrandLifemax
Model331
CategoryAlarm Clock
LanguageEnglish