17
Setting Timer
To reset the weekly automatic self-cleaning timer [See Figure 12]
•
•
•
•
•
•
•
After a power outage, check the timer and set to the correct time of day.
Changing Self-Cleaning Cycle
time. Adjusting the clock to read two hours later than the actual time tricks the
automatic rinse cycle into thinking it is 2:00 a.m. when it is only 12:00 a.m.
See video instructions at LifeSourceWater.com/customer-care.php
Figure 12
To Next Page
Loading...
Need help?
General
