Operating instructions:
1. Check that mains voltage complies with the voltage stated on the product.
2. Adjust the speed with the switch on motor housing: 0-Stop I -Low II-Medium III-High
3. Push the OSCILLATION KNOB on the motor housing to activate the oscillation function. Pull
the OSCILLATION KNOB to stop.
Maintenance instructions:
1. Before cleaning, turn the fan off and unplug from the power supply.
2. To clean the fan, use a soft cloth to wipe off any dust. If the fan is very dirty, use a
damp cloth and wipe dry. Do not use any cleaning detergents, sprays or other
chemicals, as they will damage the fan.
3. Store the fan in the original packing in a dry, ventilated area.
4. The motor bearings are permanently sealed and do not require additional lubrication.
5. Do not allow water to drip onto or enter the fan housing.
Specifications:
220-240V ~ 50Hz
50W
To Next Page
Loading...
Need help?
General
