TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
SEC
NO NEW HARDWARE REQUIRED FOR THIS PAGE
1.
SEC
1.3
1
9/16”
Scrap Wood
)NORDERTOSEATTHESWINGBARPOLESSTRIKEEACHENDOFTHESWINGBARVERYHARDlVETOSIXTIMESONAPIECEOFSCRAPWOOD
ORCARDBOARD!FTERTHESWINGBARPOLESHAVEBEENSEATEDTIGHTENTHEHARDWAREFROMSTEPSAND
ATTENTION: THIS STEP CANNOT BE REVERSED!
Note: Do not hit your feet with the pole
sections, as serious injury could occur.
!
Note: Tighten the hardware from steps 1.1 and 1.2
before continuing to the next step.
!
WARNING
The Poles must be seated together! They must be struck
on a hard surface fi ve to six times! Failure to seat the
Poles correctly could allow the Poles to separate during
use, which could lead to serious personal injuries or
property damage.
BKS
BKR
BKS