Lifetime 290038 - Page 20

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
20
SEC
2.
2
SEC
2.7
!TTACHATurn Bar (BKN)TOTHEASSEMBLED!&RAMEWITHTHEHARDWARESHOWN
SEC
2.6
!TTACHANA-Side Bracket (BKQ) to a Top Pole (ALH)BYlNGERTIGHTENINGTHEHARDWARESHOWN-AKESURETHESTRAIGHTEDGEOFTHE
!3IDE"RACKETISAGAINSTTHEOutside Bracket (BKO)ASSHOWN
Note: Repeat this step to assemble the B- Side Bracket (BKP) to the
other side of the assembly.
!
Note: Repeat steps 2.4 through 2.7 to assemble
the other A-Frame.
!
BFBX
BFCX
ALH
BKQ
BFB
BFB
BFC
BFC
BKQ
BKN
BFB
BFB
BFC
BFC
BKO
Straight Edge
5/8”
7/32”
Note: Only finger tighten the hardware in this step.
!