1
2
3
65
7
8 9
EN
User Guide
FG-1025
Portable
Multi-Power Charger
4800mAh
Thank you for purchasing a Lifetrons Portable
Multi-Power Charger. It is designed to recharge
different portable devices. This user guide
outlines the operating procedures and safety
precautions. Please read it carefully to make
sure you are using this charger properly and
retain it for future reference.
What's Inside
• Portable Multi-Power Charger (FG-1025)
• USB charging cable
• Interchangeable charging connectors*
• Storage pouch
• User guide
*connectors may vary depending on country
Compatibility
Please make sure that the required DC (Direct
Current) voltage of your portable electronic
devices does not exceed 5 Volts. This is not a
transformer and does not provide a power
switching function. Please follow the instructions
below before using the Lifetrons
®
Portable
Multi-Power Charger.
Features
•
Up to 4 times more power than your existing battery*
• Provides up to 15 days of standby time on your
mobile phones, 80 hours on your music player
and 12 hours on your portable game consoles
• Compatible with most portable electronics such as
mobile phones, mp3 players and game consoles
• Connect the Portable Multi-Power Charger to your
portable electronic devices whenever and
whereever you need battery power
* Calculated by standard 600mAh Li-ion battery.
Charging frequency may vary on actual usage
pattern, battery capacity and battery life status.
6. What should I do if the connectors provided
do not support my portable device?
Lifetrons provides various types of connectors.
You may purchase them on our website or
contact our customer service for more
information. Please do not use any other brands’
connectors to connect to the charger without
Lifetrons authorization.
7. Can I use my original USB cable provided by
my mobile phone manufacturer instead of
using Lifetrons?
The USB ports of the FG-1025 are specially
designed to use with the Lifetrons USB cable,
which is compatible with various portable
devices. Thus, cables not authorized by Lifetrons
are not recommended for use with the product.
Lifetrons does provide various connectors,
accessories and after sale services for customers.
We recommend that you use only Lifetrons
cables in order to receive full warranty service
from Lifetrons.
8. I unplugged the charger before it was nished
charging. Why are the LED lights flashing?
If you unplug the power supply before the
FG-1025 is fully charged, it could possibly trigger
an error LED display. Please plug it back in and
wait until it is fully charged before disconnecting it.
Disposal of Electrical and Electronic Equipment
This symbol indicates that all electrical and
electronic equipment included with this product
should not be treated as household waste.
Instead, it should be left at the appropriate
collection point for the recycling of electronic
equipment. By ensuring this product is disposed
of correctly, you are helping to prevent negative
consequences for the environment and human
health. To recycle this product, please contact
your local city ofce, household waste disposal
service or where you purchased the product.
Limited Warranty
If within 12 months of purchase this product or
any part thereof is proven to be defective by
reason of faulty workmanship or defect in
materials, we will repair or replace the same
product free of charge of labor or materials on
condition that:
1. The original invoice or sales receipt with the
date of purchase is presented with the
defective unit.
2. Lifetrons does not take any responsibility for
lost information of any kind and will not
reimburse you for any such loss.
3. The limited warranty is only valid if the original
proof of purchase for this product, issued by
a Lifetrons authorized dealer, specifying the
date of purchase, is presented with the
product to be repaired or replaced. Lifetrons
reserves the right to refuse warranty service if
this information has been removed or
changed after the original purchase of the
product from the dealer.
Safety Precautions
Please follow the rules outlined in this guide closely
to ensure your safety and flawless operation:
• Be cautious of any edges, uneven surfaces,
metal parts, accessories or packaging to
prevent possible injury or damage. Take note
that this product should not be placed in your mouth.
• Do not modify, repair or dismantle the
product. Doing so may result in re, electric
shock, complete breakdown of the product,
etc. and will void the warranty.
• Do not use any kind of liquid to clean the product.
Keep in mind that the surface of the product
should only be wiped with a clean dry cloth.
• Do not use this product in locations with high
temperatures or high humidity levels (i.e.:
bathrooms); ideally, the product should be
used in a location free of excessive dust and
not exposed to direct sunlight.
• Do not insert foreign objects or liquids into the
product; this could damage the product.
• Do not touch this product when your hands
are wet; this could result in electric shock.
• Refrain from dropping the product or
bumping it against other objects.
• Do not use this product in hazardous locations.
• Should any abnormal situations or problems
occur while using this product, discontinue its
use immediately.
• The product may explode if disposed of in a re.
Children
Keep out of reach of children. Do not allow
children to play with your product or its
accessories. They could hurt themselves or
others and could accidentally damage the
product. Your product and its accessories may
contain small parts that could become
detached and create a choking hazard.
Specifications
Battery: Samsung Lithium-ion, 4800mAh
Input: DC 5V / 500mA/1a
Output: DC 5V / 500mA
Charging time: 5.5-6 hours
LED indicator: 4
Dimensions: 42mm x 93mm x 27mm
Weight: 129g
How to Use
A. How to Recharge
The charger has already been partially charged
and is ready to use directly after purchase.
From time to time, your portable devices may
consume the charger’s power. When there is
no LED power, the charger needs to be recharged.
Please recharge it before you use it again.
1. Recharge your charger by using the
micro-USB charging cable (included).
2. Connect your charger to the micro-USB
cable, then to any USB port (Computer,
AC adaptor) to recharge the charger.
3. Do not disconnect the charger before
the charging cycle is completed.
4. A rolling LED will flash on the charger to
indicate the charging process. When the
charger is fully charged the LED changes
from rolling to solid blue.
USB jack
Micro-USB
jack
Micro-USB
charging cable
*Please ensure that the computer is not in sleep
mode during charging. If you cannot see the
rolling LED display, the USB most likely has
insufcient power to trigger the charging
process of the FG-1025. Please try another USB
port. If you would like to use a multiple USB hub
for charging, please make sure it is connected
to a power supply. If you do not use your
FG-1025 frequently, please ensure that the
charger is being recharged once every four
months to maintain the best performance.
B. How to Recharge your Device
When your portable devices are running out of
battery power, you can recharge them with the
charger anytime and anywhere without AC
power supply.
1. Connect the charging cable to the USB port
(on the top of the charger).
2. Plug in the suitable connector to the charging
cable and then into your portable device.
3. Press the “CHECK/START" button to start the
charging process.
4. When no LED lights show up, the device is
out of power. If you want to use the charger
again, please recharge it by following the
steps in part A.
Portable
device
USB jack
Micro-USB
jack
Connector
CHECK/START
button
3. What should I do if my portable device will
not recharge?
Please make sure that you connected your
portable device to the charger correctly and that
the charger has enough power to charge your
device. Press the “CHECK/START” button to
start charging. If the battery level is empty, please
connect the charger to any USB port with a
sufficient power supply to recharge it (USB hubs
may not provide sufficient power).
4. Why, after many uses, can my charger only
charge my portable devices for a few hours?
This is a general characteristic of Li-ion batteries.
All rechargeable batteries can recharge and
discharge several hundred times. From time to
time (depending on how often you use it), you will
find that the charger can support your portable
device for only a few hours and needs to be
recharged more frequently. As with other
rechargeable batteries, you may eventually need
to replace your battery. We recommend that you
recharge and discharge the FG-1025 fully at the
beginning of use at least two times to maximize
the power available.
5. The charger feels hot during charging, is this
normal?
This is a normal situation. Electric heat has been
generated during the recharging process. The
charger has over-heating protection, which will
terminate the charging process if it becomes too
hot. (Note: If charging an iPad or other tablet PC
and it becomes too hot, please stop charging
and let it cool down). If you notice that the
charger is unacceptably hot, please stop using it
immediately and contact our customer service.
Attention:
Some portable devices may have a
Mini-USB/Micro-USB port. Please note that
some of the Mini-USB/Micro-USB ports may
only support the data transfer function. If your
devices (Camera, mobile phone, etc.) contain a
Mini-USB/Micro-USB port, please read the user
guide of your portable device carefully and
make sure that it supports the charging function.
Using your Portable Device while Charging
You can charge the battery of your portable
device at any time. The time needed to charge
your device will vary due to different battery
capacities. You can terminate the charging
process without damaging the battery, but it
could possibly trigger an error indication on the
display. To recover this error, please fully
recharge the charger.
FAQ’s
1. How do I know if my charger is connected to
the power supply?
A blue rolling LED will flash on the charger to
indicate the charging process.When the
charger is fully charged, the 4 LED lights change
from a rolling LED to solid blue.
2. How do I know if my portable device is being
charged properly?
Generally, your electronic products provide
icons to indicate the charging signal. If your
portable device has not been used or charged for
a long time, the battery may need more power to
wake it up. The device may also take a longer
time to start up. Please verify that you are
connecting your portable device with the suitable
connector. If you cannot configure the charger
please contact our customer service.
4. The warranty does not cover product failures
which have been caused by use of
accessories or other peripheral devices which
are not Lifetrons branded original accessories
intended for use with the product. The
warranty does not cover any damage caused
by misuse, abuse, neglect or accidental
breakage.
5. The warranty does not cover product failures
caused by modications, repairs or
disassembly by any person not authorized by
the manufacturer.
6. Any defective unit or part shall become
property of the manufacturer.
Additional Information
Register your Lifetrons product online at
www.lifetrons.com.
Please visit our website www.lifetrons.com
or contact our customer service center at
cs@lifetrons.com to learn more about our
new products and special offers.
©Copyright 2012 by Lifetrons Switzerland GmbH. Lifetrons
®
is a
registered trademark of Lifetrons Switzerland GmbH or Lifetrons
International Limited. All brands and product names listed are
trademarks or registered trademarks of their respective holders and are
hereby recognized as such. Specifications are subject to be changed
without prior notice. All rights reserved.
This user guide was originally composed in English and was
subsequently translated into other languages. The delity of
subsequent translations cannot be guaranteed. In case of conflict
between the English version and another language version, the English
version takes precedence.
4
Need help?
General