LIFX BEAM - Getting Started; Quick Setup Guide; Layout Planning; Mounting Preparation

b ~~,,._\l>c,
Tips.
-1~0\.'--~?,.
e,O~'
" '
\>\..\)C>
\
\> o ,jll~~
c,P,..~\.'t
\I.~~~
cP
PLACE BEFORE
POWERING
To ensure correct operation of
your Beams, mount them all in
sequence before turning the
power on.
J
~=
I
Quick set up.
E-- LAYOUT IDEAS
Choose your layout-
Beams magnetically
snap together and
apart so you can find
your look easily.
PREPARE & STICK
Peel off the sticker backs
from the Command
StripsTM and affix Beam
to the wall one piece at
a time. Each Beam will
touch the next closely
without gaps .
ILLUMINATE
When all of your
Beam pieces are
connected, turn the
power on and use
the App or voice to
control. Enjoy!
n
'
/
DECOR OR FRAME
Beams are designed to
work as a framing device
/
'
PLACE, PRESS & HOLD
Each time you affix a Beam
to the wall, press & keep firm
pressure for 30 seconds to
ensure it is secure. It should
not wobble & will feel secure
when it is affixed.
for architectural elements
like windows and doors or
to stand alone as illuminated
wall art.