LIFX BEAM - Arrangement Styles; Wall Mounting Guide; Surface Requirements & Cleaning; Securing the Beam

CUSTOMIZE
PUTTING UP YOUR BEAM
Your Beam can be applied to metal, glass,
painted, stained or varnished wood, tile, painted
cinder block, plaster, and painted wallboard .
In all cases ensure that the surface is a flat,
clean, sealed and hard. Clean the surface
with isopropyl rubbing alcohol, gently wiping
and leave to dry . Do not use other cleaning
substances. To apply to the wall, remove the back
command strip liner, and push the product firmly
on the wall for 30 seconds, putting pressure on
each contact point.
See go.lifx.com for more information.