RECOMMENDED INSTALLATION REQUIREMENTS
This device should only be installed in light ttings and xtures that are designed
to accept each tting. Lamps, ttings and xtures that are designed to accept
smaller or lower wattage light bulbs may result in the LIFX® bulb operating below
its optimal capacity. For optimal performance it is recommended that LIFX® bulbs
be tted into xtures that provide sufcient air ow through and around the bulb.
It is recommended that the LIFX® bulb be installed away from other devices
designed to receive or transmit radio signals. It is recommended LIFX® bulb/s
be installed and operated at a minimum distance of 30 cm from the body.
For lamps with a weight signicantly higher than that of lamps for which they are
a replacement, attention should be drawn to the fact that the increased weight
may reduce the mechanical stability of certain luminaires and may impair contact
making and lamp retention.
INTERFERENCE
LIFX® has been designed to minimise interference with other radio, broadcast
or receiving devices. The manufacturer is not responsible for any interference
caused as a result of modications to the product or by failure to adhere to the
recommendations in this document and at support.lifx.com. This device generates
To Next Page
Loading...
