LIGHT INC UPFOGGER 1500 RGB

To Next Page

Thank you for buying the Light-inc UPFOGGER 1500 RGB. For your own

safety, please read this user manual carefully before installing the device.

When receiving the machine, open the package and check carefully whether

the machine is damaged or the accessories are lost, if any problems, please

contact the supplier.

Technical Parameters

Power: 1500W

Voltage: AC 230V 50Hz

Control mode: LCD display, DMX 512, wireless remote control

Warm-up time: 3 minutes

Capacity of tank: 2 liters

Fluid consumption (100% output): 18000 Cu. ft/min

Smoke distance: 6-8 meters

Weight: 12.3kgs

Guidance ………………………………………………………■

1. This product can be installed upwards or placed on the ground.

2. Keep the fog machine flat, do not tilt or flip. Before connecting this unit to

the mains power supply, you must add the fluid tank with high quality fog

fluid and check that the nozzle is clean and unobstructed.

3. Before connect to power, you should check whether the voltage you use is

suitable for the fog machine or not.

4. Power cord should be plugged in to a grounded electrical outlet and put the

switch to “ON”. Then the fog machine starts warming up and you can spray

fog after warming up is completed.

Control Mode………………………………………………■

1. Remote control key functions:

Button A: Fog + 100% Red Button C: Fog + 100% Blue

Button B: Fog + 100% Red + 40% Blue Button D: Fog + 100% Red + 40% Green

2. DMX control: 7 DMX channels.

CH1: Smoke output CH2: red light CH3: green light CH4: blue light

CH5: LED strobe CH6: built-in program CH7: built-in program speed

3. LCD display

Button

Function

FUNCTION

DOWN

TIMER

VOLUME

MANUAL

Enters the programming mode

Value adjustment upward

Value adjustment downward

Starts the timer controlled operation

Starts or stops all operation

Press and hold for manual fog output

Interval 1——200 Pause time between timed output

Duration 1——200 Duration time of timed operation

DMX512 1——512 Set the starting DMX address

Volume 1——100 Set the volume output

Red 0——255 Green 0——255

Blue 0——255 Glint 0——255

Skip 0——255 Gradual 0——255

Notice 1………………………………………………………■

1. This fog machine should be used in dry and well-ventilated place.

Please avoid any water or rain fall in the machines, if water or rain falls

in, turn off the power immediately. The distance to another object should

be at least 30cm. Keep far away from children, fire, explosive and

flammable things.

2. When the fog fluid is running out, add fog fluid in time. If the fog

machine is out of fluid, the pump and other parts will get damaged.

When adding fluid, remember to turn off the power and carefully avoid

spilling over.

3. The fog machine should work under professional worker’s super

vision, please do not add flammable liquids, gas or perfume into the fog

fluid tank.

4. All fog machine will have condensation or moisture around the nozzle.

5. All fog machine have cycles and temperature cooling to a point, the

pump will automatically turn on and begin heating, until heating

complete, the machine starts to spray smoke.

Need help?

Do you have a question about the LIGHT INC UPFOGGER 1500 RGB and is the answer not in the manual?

The UPFOGGER 1500 RGB is a fog machine designed for various applications, offering both functional control and RGB lighting capabilities. It is intended for use in dry and well-ventilated environments, with a strong emphasis on safety and proper maintenance to ensure longevity and optimal performance.

Function Description:

The primary function of the UPFOGGER 1500 RGB is to produce fog. It features an LCD display for programming and control, allowing users to adjust various parameters such as interval, duration, DMX address, and volume output. The device also incorporates RGB lighting, with individual controls for red, green, and blue light intensity, as well as glint and gradual effects. It supports multiple control modes, including LCD display, DMX 512, and wireless remote control, providing flexibility in operation. The machine is capable of both timer-controlled operation and manual fog output.

Important Technical Specifications:

Power: 1500W
Voltage: AC 230V 50Hz
Control Modes: LCD display, DMX 512, wireless remote control
Warm-up Time: 3 minutes
Capacity of Tank: 2 liters
Fluid Consumption (100% output): 18000 Cu. ft/min
Smoke Distance: 6-8 meters
Weight: 12.3 kgs
DMX Channels: 7 channels (CH1: Smoke output, CH2: red light, CH3: green light, CH4: blue light, CH5: LED strobe, CH6: built-in program, CH7: built-in program speed)
RGB Control: Individual control for Red, Green, Blue (0-255), Glint (0-255), Gradual (0-255)
Interval/Duration: 1-200 units (for timed output)
Volume Output: 1-100 units

Usage Features:

The UPFOGGER 1500 RGB can be installed upwards or placed on the ground, but it must always be kept flat and not tilted or flipped. Before operation, users must ensure the fluid tank is filled with high-quality fog fluid and that the nozzle is clean and unobstructed. It's crucial to verify that the voltage used matches the machine's requirements. Once plugged into a grounded electrical outlet and switched "ON," the machine will warm up, after which fog can be sprayed.

The LCD display offers several buttons for control:

FUNCTION: Enters programming mode.
UP/DOWN: Adjusts values.
TIMER: Initiates timer-controlled operation.
VOLUME: Starts or stops all operations.
MANUAL: Press and hold for manual fog output.

Remote control key functions include:

Button A: Fog + 100% Red
Button B: Fog + 100% Red + 40% Blue
Button C: Fog + 100% Blue
Button D: Fog + 100% Red + 40% Green

Safety is paramount during operation. The machine should be kept at least 30cm away from other objects and far from children, fire, explosive, and flammable materials. In case of water or rain falling into the machine, the power must be turned off immediately. It's important to add fog fluid in time to prevent damage to the pump and other parts, taking care not to spill. Only professional workers should supervise its use, and flammable liquids, gas, or perfume should never be added to the fog fluid tank. Condensation or moisture around the nozzle is normal. The machine operates in cycles, with temperature cooling, and the pump will automatically turn on to heat until ready to spray smoke.

Maintenance Features:

Routine maintenance is essential for reducing replacement or repair costs and ensuring a long lifespan. The machine can be affected by high-concentration fluid, poor-quality fluid, or overheating. Regular care includes cleaning the machine periodically. After approximately 20 hours of use, it is recommended to clean the heat pipe to remove accumulated impurities. This is done by using a cleaning liquid consisting of 80% distilled water and 20% white vinegar. The process involves:

Cleaning the pipe in the tank and the filter head.
Removing the fog liquid and running the cleaning liquid through the machine until it runs out.

If the fog output decreases, the pump starts making noise, or the fog stops completely, the power should be turned off immediately. Users should then check the fluid tank, fuse, controller interface, and power supply. If these components are normal and the problem persists, the supplier should be contacted.