LIGHT MY BRICKS LEGO Assembly Square 10255 User Manual

LEGO ASSEMBLY SQUARE 10255 LIGHT KIT INSTALL GUIDE
TROUBLESHOOTING 69
Troubleshooting
In order for Light My Bricks components to fit
in between and underneath LEGO® bricks, the
components need to be very small. Due to this
nature, Light My Bricks components can be
easily damaged when not handled correctly.
Be careful when removing unpacked
components out of the packaging and ensure
not to forcibly pull at the wires as this can
damage the soldering that attach the wires to
the LEDs.
If the wiring is detached from the LED itself, the
light will not operate.
When connecting lights to your LEGO set, check
that there are no pinched wires underneath
or in between bricks and plates. When the
wires are pinched and the exposed wires are
touching each other, this can cause a crosswire
and the lights to not function correctly.
Check Your Wires

LIGHT MY BRICKS LEGO Assembly Square 10255 Specifications

General

Brand	LIGHT MY BRICKS
Model	LEGO Assembly Square 10255
Category	Lighting Equipment
Language	English