Lightmaxx Vertical Fog 3.0 User Manual

ENGLISH
DMX mode:
Configuration of the DMX connector:
Resistance 120 ohm // ¼ w between pin 2 (DMX-) and pin 3 (DMX+) oft he last fixture.
Connect the DMX input of your device to the DMX output of your DMX controller or interface.
Always use a DMX cable with a 110 Ohm resistor for this connection. Address the device
according to your DMX configuration. The following tables show the respective DMX modes of the
individual devices with the corresponding values and functions:
6 Channel Mode:
Channel
Value
Function
LEDs
1
016-255
Fog
2
001-255
Red
Inner LEDs
3
001-255
Green
4
001-255
Blue
5
016-050
051-085
086-120
121-155
156-190
191-225
226-255
Red
Yellow (Red + Green)
Green
Cyan (Green + Blue)
Blue
Magenta (Blue + Green)
White
Outer LEDs
6
016-255
Color change

Lightmaxx Vertical Fog 3.0 Specifications

General

Brand	Lightmaxx
Model	Vertical Fog 3.0
Category	Fog Machine
Language	English