LightProcessor DMuX - Specifications; DMuX Specifications; Store Specifications; Buffer Specifications

DMuX
Power Supply: 230V AC 50-60Hz (115V AC 50-60Hz version available on request)
Signal Input: USITT DMX512 (1990)
Input Socket (Front) DMX512 via 5-pin XLR
Input Socket (Rear) DMX512 via 3-pin XLR
Link through (Front) DMX512 via 5-pin XLR
Link through (Rear) DMX512 via 3-pin XLR
Signal Output +10V DC analogue (-10V version available) 10mA per channel
Output Sockets (Front) 4 x 8-pin locking DIN socket (female)
Output Sockets (Rear) 6 x 5-pin DIN socket (female) and 4 x 8-pin locking DIN socket (female)
Dimensions 1U (44mm) x 19" (482mm) x 165 mm
Weight 3.5Kg
Store
Power Supply 230V AC 50-60Hz (115V AC 50-60Hz version available on request)
Lighting Channels 512
Control Channels 6-Binary address, 6-Control functions
Signal Input (Lighting) USITT DMX512 via 5-pin XLR
Signal Input (Control) 0-10V DC via 25 pin sub-D connector
Signal Output (Lighting) USITT DMX512 via 5-pin XLR
Signal Output (Control) Nominal 12V DC @ 30mA max
Memory 64 scenes of 512 channels. Memory may be saved to PCMCIA card.
Dimensions 1U (44mm) x 19" (482mm) x 165 mm
Weight 3.5Kg
Buffer
Power Supply 115/230V AC 50-60Hz (selectable)
Signal Input USITT DMX512 via 5-pin XLR
Isolated Outputs 4 x 3-pin XLR and 4 x 5-pin XLR (all 5-pin version available on request)
Dimensions QBuffer - 338mm x 191mm x 59mm.
DMXDistibutor - 1U (44mm) x 19" (482mm) x 200 mm
Weight QBuffer - 4kg
DMXDistributor - 3.8Kg.
Fixing QBuffer - M10 bolt or optional wall mounting bracket
DMX Distributor - Rack mount
Merge
Power Requirements 230V AC 50-60Hz (115V AC 50-60Hz version available on request)
Signal Inputs USITT DMX512 (1990), via 5-pin XLR.
0 to +1 0V analogue via 25-pin sub-D connector.
Signal Output USITT DMX512 (1990), via opto-isolated 5-pin XLR.
Dimensions 1U (44mm) x 19" (482mm) x 208 mm
Weight 3.6kg
Environmental - All Products
Temperature 0-30°C
Relative humidity 0-90% non-condensing
Pollution Degree 2
Protection Classification IP30
Conformance Designed to meet CE regulations covered by:
LVD (EN60950)
EMC (BSEN50081-1 and BSEN50082-1)
LightProcessor DMXTools, April 2003
Page 18
SPECIFICATIONS