DAILY OPERATION INSTRUCTIONS
2. Remove the microphone from the charger and put on.
• The microphone will default to the Mute position, the
teacher status will turn to red.
• Place the microphone around your neck and insert the
earbud.
• Press the power/mute button, the teacher status will turn
blue, indicating the microphone is active.
3. Open the Lightspeed Activate app on your mobile device and
begin instruction. Use the app to:
• Address the whole class
• Monitor and Instruct small groups
• Activate student group sharing
• Capture an audio/video recording
• Take classroom photos
• Adjust volume levels
1. Remove the pods from the charger and place them on the group tables.
• The speakers will stay powered on while charging.
• Note the location of the pod numbers.
Power /
Mute
lightspeed-tek.com / 800.732.8999 / 503.684.5538
QS0551US01-0
To Next Page
