Page 3
Voice Tracking with Sennheiser TCC2
1. Introduction
This document was created to help integrators during the installation and configuration process of the Voice Tracking
Solution.
The system’s main components are:
Lightware UCX series Universal Matrix Switcher,
Sennheiser TCC2 ceiling microphone,
PTZ camera, that can be controlled via Visca protocol.
Camera for overview shot of the room.
INOGENI CAM230 USB and HDMI multi-camera switcher
The room automation is done by Lightware Advanced Room Automation (LARA). It is a modular system which includes
drivers for the equipment applied in the system. In our case TCC2 driver, a Visca protocol driver and two user-panels
that make setup easier.
To Next Page
Loading...
