Lignomat USA, LTD. 14345 NE Morris Ct, Portland OR USA, Tel: 503-257-8957, FAX: 503-255-1430, e-mail: sales@lignomat.com
Mini-Lignos MD/C, S/DC, DX/C have two integral pins
and a cable connection built-in. To measure connect
cable ends into the
inserts besides the
pins. Depress on-off
switch between pins by
hand to activate meter.
mini-Ligno C-Model
mini-Ligno C-Model
All mini-Lignos come with a two-year warranty,
accessories have a one-year warranty,
pins and batteries are excluded.
PK
Kiln
Probes
PK-mini
Cable 6’
1.6
Electrodes for mini C-Models
E12 Electrode and mini-BNC Cable is for
measure- ments up to 2” (50mm) deep in wood
and soft building materials (drywall, gypsum,
plaster, etc.) Allows comparing surface and core
moisture.
E14M Inspector Electrode: in-Hand probe
includes cable, EG Pins, teflon-coated. Measures
hard to reach places easily, because of its slim
shape. Extendable handle. Optional EL Pins 7”.
E16 Specialty/Concrete Electrode and
mini-E16 Cable for measurements of concrete
and other hard building materials. Standard pins
5/8” (15mm). Optional add EL Pins 7” (17.5cm)
1.7
In-kiln - remote
In-Kiln PK Probes and
mini-PK Cables
are used
for measure-ments of
stacked lumber in kilns,
air-drying yards or
warehouses. PK Probes
are available to measure
up to 2.75” deep. Cables
can be upon request up
to 50ft (15m) long.
Non-Kiln Applications
Lignomat’s cable system works well for monitoring inaccessible areas
(underside of floor planks, structural components, behind drywall,
roof trusses, etc.)
Teflon coated pins for a measuring depth of 3/4” and 7” are also
available. For those applications cables with loops are available.
E14M Inspector Electrode
EL Pins for 7” (17.8cm)
Specialty/Concrete Electrode E16
mini-BNC Cable
E12
Slide-Hammer
Electrode
mini-E16 Cable
PK Wood
Probes
mini-PK
Cable
To Next Page
Loading...